Airlink101 AR675W Instrukcja Użytkownika

Wireless N Green Router Model # AR675W User’s Manual Ver. 1A

10Step 3 Connect the A/C power adapter to the electrical outlet, and then connect it to the ‘Power’ socket of the router. Please check all LEDs on

112.2 Configuring the Router – Setup Wizard Step 1 Open the web browser (i.e. Internet Explorer or Mozilla Firefox) and type 192.168.2.1 in the URL

12Step 3 Click on Setup Wizard. Step 4 Click Next to start the Setup Wizard.

13Step 5 Configure the Time Zone Settings of the Router. Click Next. The Time Zone allows your router to base its time on the settings configured h

14 The LAN Interface settings allow you to configure the parameters for local area network. Parameter Description IP Address This is the route

15PPTP Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP) connection. L2TP Your ISP requires you to use a Point-to-Point Tunn

16 Parameter Description User Name Enter the User Name provided by your ISP for the PPPoE connection. Note: Depending on the ISP, you may need t

17Parameters Description IP Address This is the IP address that your ISP has provided for you. Subnet Mask Enter the Subnet Mask pr

18L2TP Select L2TP if your ISP requires the L2TP protocol to connect you to the Internet. Your ISP should provide all the information required in th

19 Menu Description Mode Please select the radio band from one of the following options. 2.4GHz(B): 2.4GHz band, only allows 802.11b wireles

Federal Communication Commission Interference Statement FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B

20Channel Width Set channel width of wireless radio. Do not modify default value if you don’t know what it is, default setting is ‘40 MHz’. Control

21 Parameters Description Key Length You can select the WEP key length for encryption, 64-bit or 128-bit. Larger WEP key length will provide

22 WPA(TKIP) Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-shared key to authenticate wireless stations and encr

23WPA2(AES) / WPA2-Mixed Select WPA2 (AES) for Security Mode, and enter a Pre-Shared Key between 8 to 63 characters (alphanumeric, case sensitive).

24Step 10 Click OK to finish the Setup Wizard. After your router restarts, you will go back to the Status page with valid IP address assigned by you

252.3 Connecting to the Router Wirelessly You must configure your wireless computer in order to establish a wireless connection to the router. In th

26Step 3 Enter the Security key you configured for the Router (see Step 8 in Section 2). Click Connect. Step 4 Click on Close. Now the wireless conn

272.4 Troubleshooting If you have trouble connecting to the Internet, try the following steps. Step 1 Power off the Cable/DSL modem, router, and com

28Chapter 3 Using Web Configuration Utility The Web Configuration Utility contains advanced features that allow you to configure the router to meet

293.1 Network 3.1.1 WAN Use the WAN Settings screen to change your Internet connection type. The WAN Settings screen allows to specify the type of

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure set forth for an uncontrolle

30 Parameters Description IP Address This is the IP address that your ISP has given you. Subnet Mask Enter the Subnet Mask provided by your ISP.

31Enable IGMP Proxy Check this box if you want to enable the router as IGMP proxy to implement multicast routing. Keep default if you don’t know wha

32 Parameters Description Host Name Please enter the host name, this is optional, and only required if your service provider asks you to do so.

33 Enable IGMP Proxy Check this box if you want to enable the router as IGMP proxy to implement multicast routing. Keep default if you don’t know wh

34 Parameters Description User Name Please input user name assigned by your Internet service provider here. Password Please input the password as

35Enable IGMP Proxy Check this box if you want to enable the router as IGMP proxy to implement multicast routing. Keep default if you don’t know wha

36 Parameters Description Attain IP Automatically Select this option if your ISP will assign IP Address to your router directly. Please contact y

37“Manual” - only connects to Internet when ‘Connect’ button on this page is pressed, and disconnects when ‘Disconnect button is pressed. Idle Time

38the NAT gateway of the router. Enter the port number of your FTP server. Keep default if you don’t know what it is. TTL For some special applicat

39Attain IP Automatically Select this option if your ISP will assign IP Address to your router directly. Please contact your ISP if you don’t know wh

Table of Contents CHAPTER 1 INTRODUCTION...6 1

40 DNS 1~3 Please input the IP address of DNS server provided by your service provider. Clone MAC Address For some applications, you may need to de

41 Parameters Default Description IP address 192.168.2.1 This is the router’s LAN IP address (Your LAN clients default g

42 Static DHCP Specify the Static DHCP Addresses for your LAN clients. Domain Name Enter the domain name of your LAN interface if there is one. Cl

43Selected’ button. (You can select more than one setting). Delete All If you want to delete all settings listed here, please click ‘Delete All’ bu

44Password/Key The password you set for the DDNS service account above. Click <Apply Changes> at the bottom of the screen to save the above c

453.2 Wireless 3.2.1 Basic Settings You can set parameters that are used for the wireless stations to connect to this router. The parameters includ

462.4 GHz (G): 2.4GHz band, only allows 802.11g wireless network client to connect this router (maximum transfer rate 54Mbps*). 2.4 GHz (B+G+N): 2.4

47wireless router (set the option to ‘Disable’), so only people those who know the SSID of your wireless router can get connected. WMM The short of

48Parameters Default Description Enable Check this box if you want to enable multiple access points. Band Please select the radio band from one

49change this value unless you know what will happen after modification. Broadcast SSID Decide if the wireless router will broadcast its own SSID or

3.6.1 Time ...

50 Parameters Default Description Select SSID If you have configured multiple access points, please select the access point you want to configu

51 Parameters Description Authentication There are two authentication types: "Open System" and "Shared Key". When you selec

52128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9" range) or 13-digit ASCII characters as the encr

53Pre-shared Key The Pre-shared key is used to authenticate and encrypt data transmitted in the wireless network. Fill the text box by following the

54Pre-shared Key Format You may select to select Passphrase (alphanumeric format) or Hexadecimal Digits (in the “A-F”, “a-f” and “0-9” range) to be

55 Personal (Pre-Shared key). If you enable ‘Enterprise (RADIUS)’, please go to section 3.2.2.5 for more information. WPA Encryption Mode You can c

56 Parameters Description Radius Server IP Address The IP address of external RADIUS server. Radius Server Port The service port of the ext

57 Parameters Description Wireless Access Control Mode Enable/Disable wireless access control. You can choose ‘Allow Listed’ if you allow the

58 3.2.4 Advanced Settings You can set advanced wireless LAN parameters of this router. The parameters include Authentication Type, Fragment Thresho

59Preamble Type The “Long Preamble” can provide better wireless LAN compatibility while the “Short Preamble” can provide better wireless LAN performa

6Chapter 1 Introduction Congratulations on your purchase of the AR675W Wireless N Green Router. The Wireless N Green Router is recommended to be use

60 Parameters Description Enable Wireless Schedule Check this box to enable wireless schedule. Days Select to enable the wireless access poin

61 Please make sure this feature is enabled on the Router (see the screenshot above). In the instructions below, we are going to use the Airlink101 W

62 Step 3 Push the Security button the Router for 3 seconds. The WLAN LED will stay solid green instead of blinking. Step 4 The Router will now s

63

643.3 Application & Gaming 3.3.1 Port Forwarding The Port Forwarding allows you to re-direct a particular range of service port numbers (from t

65 Delete All If you want to delete all settings listed here, please click ‘Delete All’ button. Reset You can also click ‘Reset’ button to unsele

66know its IP address and click on the << button to add the IP address to the left blank. If you do not see any computer after you click on the

67by defining a DMZ Host. The DMZ function allows you to re-direct all packets going to your WAN port IP address to a particular IP address in your L

68 Parameter Description Enable QoS Check this box to enable QoS, and uncheck this box to disable QoS. Automatic Uplink Speed Check

69Delete All If you want to delete all settings listed here, please click ‘Delete All’ button. Reset You can also click ‘Reset’ button to unselect

7 Back Panel LED Light Status Description POWER Solid Green Router is powered on. Solid Green WPS setup is in progress. Off Wireless netwo

703.4 Access Restrictions The AR675W Wireless N Green Router provides extensive ways to restrict local users to access Internet. 3.4.1 Port Filter

71 Reset You can also click ‘Reset’ button to unselect all. Click <Apply Changes> at the bottom of the screen to save the above configurati

72Delete All If you want to delete all settings listed here, please click ‘Delete All’ button. Reset You can also click ‘Reset’ button to unselec

73Delete Selected If you want to delete a specific MAC address entry, check the ‘select’ box of the MAC address you want to delete, then click ‘Del

74Delete Selected If you want to delete a setting, check the ‘select’ box of the setting you want to delete, then click ‘Delete Selected’ button. (

753.5 Security 3.5.1 Firewall Enable Ping Access on WAN: When this function is enabled, other people are allowed to ping the IP address of the rout

76 Click <Apply Changes> at the bottom of the screen to save the above configurations. 3.5.3 VPN Passthrough Parameter

77Enable IPsec pass through Check this box and the router will enable IPsec packets On VPN connection pass through the router for VPN connectio

783.6 Administration The Administration page allows you to specify a time zone, to change the system password and to specify a remote management por

79 3.6.2 Password You can change the password required to log into the Router's web configuration utility. The default user name and password a

8Item Name Description Antenna A/B These antennas are 3dBi dipole antennas. Radio ON/OFF Switch the button to activate or deactivate the wireless

803.6.3 Remote Management Enable the remote management so an authorized user can configure the Router from a remote site. You can specify a port for

81To upgrade the firmware for the Router, you need to download the firmware file to your local hard disk, and click on Browse to select it, then clic

823.6.6 Reboot 3.6.7 System Log View the operation log of the system. Parameters Description Enable Log Check this box to enable the loggin

83System all This page shows the current system log of the Broadband router. It displays any event occurred after system start up. At the bottom of t

84Parameters Description Statistics Shows the counters of packets sent and received on WAN, LAN and Wireless LAN. 3.6.9 UPnP Check the box to

853.7 Status The Status section allows you to monitor the current status of your router. You can use the Status page to monitor: the Internet, LAN c

863.7.3 Wireless Status 3.7.4 System Status

87 Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Website: www.airlink101.com *Theoretical maximum wire

9Chapter 2 Connecting the Router 2.1 Building Network Connection Please follow the instructions below to build the network connection between the R